 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
PA heat laws
What are the regulations regaarding heat in a hi-rise for seniors and the disabled? The building in question is set for the heat to go off when the temp reaches 40 degrees, and it s a cinder block building where it is always either freezing or very hot.
|
||||
|
||||
|
All PA housing has this heat rule for landlords:
Provide heat between October 1st and May 15th at a minimum of 65° between 6:30 AM and 10:30 PM; 60° during the night and when the temperature is below 0° unless otherwise provided by lease. Your best bet is to go door to door and get as many other tenants as you can to file a complaint (in writing!) together. It has MUCH more clout, especially in public housing. If you aren't sure where to report to, start with City Hall main switchboard. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Dateline: U.S. resident from panama in national guard gets stationed in panama and gets married U.S. resident comes back from panama (without wife cause she does not want to leave her country) U.S. resident becomes a naturalized citizen of U. S. Naturalized U. S. citizen gets american...
The annual world consumtions of coal and oil over the last 20 years of this century have been and are projected to be as follows: Coal - (1980) - 3150, (1985) - 3830, (1990) - 4660, (1995) - 5150, (2000) - 5680 Oil - (1980) - 3910, (1985) - 3810, (1990) -3710, (1995) - 3530, (2000) - 3320 ...
number of cylinders = 6 maximum volume within each cylinder = 1.10 x 10-3 m3 compression ratio = 16 to 1 mass of engine = 757kg mass-to-power ratio = 4.85 kg kW-1 power-to-volume ratio = 225 kW m-3 power rating = 165kW at 3750 r.p.m maximum torque = 488Nm at 2500 r.p.m pressure, volume...
1. The advanced gas cooled reactors use steel cans to hold the nuclear fuel which is in ceramic form. They can use a maximum temp of 625 degrees Celsius. What is the maximum theoretical efficiency of such a reactor? 2. a car engine raises the temp of the fuel to about 600 degrees Celsius and...
the efficiency of a heat engine is given by: efficiency = net work output divide by total heat input = heat input minus heat output divide by heat input there is an upper limit to the efficiency given by: maximum effiecency = 1 - low temp divide by high temp a heat pump...
View more questions Search
|
