Ask Experts Questions for FREE Help !
Ask
    Vicki813's Avatar
    Vicki813 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 11, 2011, 12:50 PM
    I have a ceiling fan that one of the blade holders has broken.
    Vicki813's Avatar
    Vicki813 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Mar 11, 2011, 12:54 PM
    I have a ceiling fan that one of the blade holders has broken.
    The brochure shows the manufacturer as View Fan Inc, 383 S. West Avenue, Bradley, IL 60915. The brochure is for two 52" fans and two 42" fans. Mine is a 42" (either model # V642D or V942D). Can a blade holder be ordered? The brochure says it has a 5 yr. warranty and this fan was installed in August 2007.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #3

    Mar 11, 2011, 12:55 PM

    So you fix it or buy a new fan. What's the question?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #4

    Mar 11, 2011, 12:57 PM

    Visit a place like home depot or Lowe's... or a Lighting specialist near you. Many of them can special order replacement parts. There are online places as well that sell replacement parts. You don't have to go straight to the manufacturer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I tighten ceiling fan blade? [ 1 Answers ]

I have a Hunter ceiling fan that sqeaks loudly when it is turned on. Looks like one of the blades is loose, but I cannot figure out how to tighten it. This fan has a light fixture, which makes it hard to get a screwdriver in to try and tighten the blade. Thanks

Ceiling fan blade removal [ 1 Answers ]

How do I remove fan blades from Hampton Bay remote fan as pictured in link? Hampton Bay 52 In. Argenta Brushed Nickel Finish Ceiling Fan - 61413 at The Home Depot

Ceiling fan blade removal [ 2 Answers ]

How do I remove the blades from a remote control, nickel and Black Hampton Bay fan?

Ceiling fan blade flange replacement [ 2 Answers ]

I have a ceiling fan with a bent blade flange which has caused the fan to wobble. I was able to get replacement blade flanges but I'm not sure how to go about replacing it. The fan does not have a light fixture and the box which has the wiring for a light fixture somewhat obscures the screws for...

Ceiling fan 5A00007 Model # AC-552 blade part replacement. [ 12 Answers ]

I am looking for a black piece of hardware that attaches the blade to the motor of a peach coloured five-blade fan with four lights. The number found on the fan is 5A00007Model #AC-552 manufactured in May 1989. Is it possible to purchase this part and where can I find it?

View more questions Search