Ask Experts Questions for FREE Help !
Ask
    betsy_bentley's Avatar
    betsy_bentley Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 16, 2009, 11:12 AM
    Ceiling fan blade removal
    How do I remove the blades from a remote control, nickel and
    Black Hampton Bay fan?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    May 17, 2009, 05:54 AM

    ..
    Attached Images
     
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    May 18, 2009, 08:16 PM

    Sometimes the light or switch housing obscures the screws, and you have to remove the light and/or switch housing to get to them. So start from the bottom of the fan and work up.

    What model fan is it?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawn Mower Blade Removal [ 1 Answers ]

Any suggestions on getting a blade off a lawn mower. I spent about an hour with a can of WD-40, ratchets, vice-grips, a hammer and I can't get the bolt to budge. Any secret tips out there? It's a standard 21" Murray push mower for reference.

Removal of Toro blade clutch [ 1 Answers ]

How do I remove the bolt (on the end of the crankshaft) that holds the electric blade clutch on a Toro commercial walk-behind Model 30159. When I try to turn it, the engine crankshaft turns with it.

Noma chipper cutter blade removal, HOW? [ 1 Answers ]

Would like to remove and sharpen blades and beaters on Noma chipper/shredder Model D1705000. Can not seem to get it unstuck. Any suggestions? Is it a keyed/tappered shaft? Thanks

Duerr Chipper Blade removal [ 1 Answers ]

I have a Duerr 5hp chipper shredder and I need to sharpen the blades. I have the cover off and the bolt that holds the cutter head out but it will not come off. Any ideas?

LT1000 Blade Removal [ 2 Answers ]

How do I lock the blade on a Craftman LT1000 riding mower to remove one of the blades

View more questions Search