Ask Experts Questions for FREE Help !
Ask
    Notaknotty's Avatar
    Notaknotty Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 5, 2011, 11:26 AM
    No power to ignition switch Help?
    While changing a 40a fuse in the engine compartment my screw driver touched something and created a spark. Now there is no power to the ignition switch. Only the horn works. Any suggestions
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Mar 5, 2011, 12:19 PM

    Test all under hood and under dash fuses with a test light or multimeter:

    https://www.askmehelpdesk.com/cars-t...tml#post252145
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What supplies power to the ignition starter switch on a 1979 Dodge D100 [ 0 Answers ]

I replaced the old broken instrument cluster with compatible Auto Meter gauges. To do this I had to cut the original (for lack of a better term) power dispersement unit for the old gauges and wired them individually to the new gauges. When I tried to start the truck there was no power coming into...

No power to ignition module or PCM ignition fuse, any thoughts [ 1 Answers ]

It's a 2001, Pontiac, Grand am, v-6 3.4. with the key in the on position there is no power to the ign mod, f/p inj, and pcm ing. so naturally its no start. I'm not sure of the circuit , the wire diagram is a little help, any suggestions? Frustrated

Fuel pump fuse has no power at it. Could this be the ignition switch? [ 2 Answers ]

I got a 1992 Chevrolet 1500 with a 5.7l and the fuel pump isn't working. It has been sitting for about 5 years. I got a 12v test light and found out that the 20amp fuel pump fuse has no power on either side of the fuse. Could this be a ignition switch problem? The ignition switch is a little...

No power at ignition. [ 1 Answers ]

I have replaced the stater and solenoid on my huskee riding mower. I still have no power at the ignition, even while jumping the battery. What could it be?

View more questions Search