Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What supplies power to the ignition starter switch on a 1979 Dodge D100
[ 0 Answers ]
I replaced the old broken instrument cluster with compatible Auto Meter gauges. To do this I had to cut the original (for lack of a better term) power dispersement unit for the old gauges and wired them individually to the new gauges. When I tried to start the truck there was no power coming into...
No power to ignition module or PCM ignition fuse, any thoughts
[ 1 Answers ]
It's a 2001, Pontiac, Grand am, v-6 3.4. with the key in the on position there is no power to the ign mod, f/p inj, and pcm ing. so naturally its no start. I'm not sure of the circuit , the wire diagram is a little help, any suggestions? Frustrated
Fuel pump fuse has no power at it. Could this be the ignition switch?
[ 2 Answers ]
I got a 1992 Chevrolet 1500 with a 5.7l and the fuel pump isn't working. It has been sitting for about 5 years. I got a 12v test light and found out that the 20amp fuel pump fuse has no power on either side of the fuse. Could this be a ignition switch problem? The ignition switch is a little...
No power at ignition.
[ 1 Answers ]
I have replaced the stater and solenoid on my huskee riding mower. I still have no power at the ignition, even while jumping the battery. What could it be? View more questions Search
|