Ask Experts Questions for FREE Help !
Ask
    bnork's Avatar
    bnork Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Mar 4, 2011, 07:08 PM
    New furnace blower works but no heat
    New Payne furnace installed today through Home weatherization program no heat but blower woks no contacts available tried all day . All stae offices closed no phone number to reach them.We are senoir citizens and my husband is disabled
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Mar 4, 2011, 07:53 PM
    Your between a rock and a hard place on this one. If you work on it you can void the warranty. But it will not hurt to make sure the gas valve is in the on position and the gas shut off out side the furnace is open. Sorry for such little help, but not knowing nothing about the gas appliances can make matters worse and dangerous if you try to work on it.
    bnork's Avatar
    bnork Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Mar 4, 2011, 08:48 PM
    Thanks so for the advice I think you are so right. I am so blessed to get a new furnace our old one was 62 years old. I was so excited to use it. It is a true blessing. I have a muscle disease and the cold makes it unbearable. Just so strange there is knowone to call for repair or troubleshooting. Thank you so for you reply. Bless you
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New furnace blower works but no heat [ 0 Answers ]

We had a new Payne model PG9YAB furance installed by weatherization warm choice. No heat but blower works haVE NO WAY OF REACHING INSTALLER CAN YOU THINK WHAT COULD DO THAT SEEMS LIKE NO GAS IS GOING TO IT?

Motor comes on, blower works-but no heat? [ 1 Answers ]

Carrier furnace heat works, ac comp. Goes on blower does not come on. No fault codes [ 0 Answers ]

I have a carrier furance the heat works, the ac comp. goes on when I turn the air on but the blower does not come on. There are no fault codes.I can take out the thermostat jump the wires and switch off sw-4 on the control board to turn on what they call emergency heat. Then the blower comes on. I...

Heat blower works ac blower won't shut off. [ 1 Answers ]

Hello, I am having trouble with my RTH230B Honeywell. I have a Gas furnace and an outdoor ac unit hooked up to a blower and the blower has a heat off cool setting on a switch on it. Our when set on heat everything works as it should. BUT as soon as I turn the blower to cool it turns on and...

Blower works on A/C but not on heat or fan only [ 1 Answers ]

I have a 1997ish intertherm A/C unit, when the Air is on the blower works fine, but when I switch to heat or fan only the blower will not work? I have bought a new blower relay & capacitors. I tested the sequencers for 240 & 24 volt, everything is reading good. I am at a loss, does anyone have...

View more questions Search