Ask Experts Questions for FREE Help !
Ask
    nlb1913's Avatar
    nlb1913 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 26, 2011, 12:08 PM
    Gm delco gas valve
    I have an old gm delco conditionair forced air furnace. All my voltages are good and I have replaced the thermocouple. I still can't get the pilot light to stay lit. can I still get replacement parts( gas valve 0 for this unit. Thanks
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Feb 26, 2011, 03:40 PM
    Do you have two wires that plug in under the thermocouple. If so you may have a limit switch blown. You can get a standing pilot gas valve from any hvac company-- over the counter.(no special license needed)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil Gas Fur smart valve sv9541 cycles, clicks valve, lights pilot on off.Flame? [ 1 Answers ]

I have a Heil Natural Gas Furnace with smart valve sv9541 that goes off and the valve click as the ignitor glows on and off while lighting the pilot light which then goes out, and back lit?Is this a flame sensor problem? Thanks for advice.

Diverter valve problem in Delco Model 21925 kitchen faucet. [ 8 Answers ]

~ 6 months ago I installed a Delta 21925 kitchen faucets for both my daughter and my wife. The spray attachment diverter valve (P/N RP6073) in my daughters faucet seems to be sticking (little/no water at spray nozzle). I checked for sediment in spray attachment - - no joy. Pulled diverter valve,...

Old AC Delco gas furnace blower won't shut off automatically [ 2 Answers ]

I am trying to troubleshoot my 43 year old (yes, really) AC Delco natural gas furnace. It is a huge furnace in a closet in my hall bathroom. I had the thermocouple replaced last December. The new problem is that now, when the temperature reading reaches the set point of the thermostat, the gas...

GM Delco gas furnace [ 2 Answers ]

I've got a GM Delco furnace model 999 that won't produce heat. The pilot flame is working. I don't see any loose or broken wires. The thermostat clicks when turned on. Is this a DIY or time to replace it. Thanks

Gas valve noise on main valve engagement [ 1 Answers ]

I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...

View more questions Search