Ask Experts Questions for FREE Help !
Ask
    pitbullscott's Avatar
    pitbullscott Posts: 26, Reputation: 1
    New Member
    		  
    #1

    Feb 24, 2011, 10:08 AM
    I have a h22 v-tec I'm going to swap my f22 out for
    Will it hook up to all my stock wires clips
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Feb 24, 2011, 11:29 AM

    Very doubtful. Totally different series engines. With have their own ECU's and maps. And I don't think the belhousings are the same either.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

H22 swapped into my 98 civic dx won't start has fire has fuel timing is dead on [ 2 Answers ]

I have changes a lot of sensors plugs and wires, new distributor cap, rotor button, coil, icm, checked all fuses and changed main relay the car will give a kick sometimes but won't start. It wasn't whirling fast so I changed starters it spins fast now but still the car won't start. It almost seams...

F22 error code on whirlpool duet front loading washing machine [ 0 Answers ]

I keep getting an F22 error code on whirlpool duet front loading washing machine. I tried unplugging the machine for 30 minutes, and checking to make sure that nothing was stopping/blocking the door. No luck. Any suggestions?

My 96 civic w/ 96 h22 won't start [ 10 Answers ]

I recently purchased this hatch with a 97 h22 a4 swap and it ran fine. Now just a few days ago I was driving down the road and the rpms dropped and the car shut off. I then waited a few min and I started it back up and it ran OK. I then drove it back to my house no problem. Well yesterday I drove...

View more questions Search