Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Increasing the water flow of a Moen shower head
[ 5 Answers ]
I have just installed new bathroom fixtures, Moen brand. I have tried to increase the pressure of the shower head. I have taken out the O ring in the top and I have unscrewed the face of the head. I have not been able to remove the head or remove the plastic in the neck. I don't want to break it...
Water Well pump running, but no water flow
[ 1 Answers ]
Hello, My water well pump is running, and I've tried priming it a few times but its not seeming to get me no where. I hear the water through the pipes, but no water in kitchen, or bathroom?
Total head and flow for booster pump in water header
[ 0 Answers ]
I want to put one booster pump in cooling water header (pipe size 350 mm), booster pump suction and discharge size is 350 mm & 300 mm. to connect this pump with main header need to put one reducer (350 x 300) at pump discharge. My question is that what will be effective lay out (1) if I provide...
Increasing pump output flow rate
[ 1 Answers ]
I have a waterfall in my pool that runs off my main pool pump via a diverter valve. Is there anything I can do to increase flow rate over my waterfall? When the diverter valve is opened it allows water over the waterfall while still filtering water through the skimmers. With the diverter valve...
Increasing Hot Water flow in Shower
[ 8 Answers ]
I am in a 4 year old home. The County Inspectors had done something in the kids' bath that only allowed lukewarm water to flow in the shower. Understand that this was done to prevent scalding water to flow on to the kids. I believe this is something to do with the Flow Valve or Cartridge or... View more questions Search
|