 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton Bay Delano Remote
Has anyone wired two remote switches for one delano fan/light. We have two switches (three way switch) from two remote wall switches to control one fan. These are hard enough to do without the added headache of two remotes. Any help would be appreciated.
|
||||
|
||||
|
Your remotes should work much like the motion sensors in https://www.askmehelpdesk.com/showthread.php?t=9511, which I answered yesterday. Wire the fan receiver to the hot wire at the fan. Leave the switches in one of the on positions. As long as nobody turns one of the switches, a single remote should work. You could even remove the switches and permanently the wires in the correct position. You must leave access to any box with electrical connections in it, but can cover it with a plain plate.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Hampton Bay Video & Fan Remote Control (Model #UR8050T). It has been working fine for about 2 years until it recently began malfunctioning. It still operates the television, but the use of the fan/light features has stopped working. It will not turn the fan on or off, and the light is...
:confused: can anyone tell me how to program the TV control on the Hampton Bay Universal Remote Control Model UR 8050T? The instructions stayed with the ex-wife.
The control on my Hampton Bay fan is not working properly. I have changed the batteries, but this is not the problem. If I buy a new remote, how can I make it compatible with this fan? Any hints?
Just installed a new fan w/ remote, lights ,upper and lower dim and brighten well with remote however fan does not operate at all. Wires from ceiling outlet are black, white, red and ground green. Instructions from mfg. show no connection for the red wire. I've tried it with the black and have...
View more questions Search
|
