Has anyone wired two remote switches for one delano fan/light. We have two switches (three way switch) from two remote wall switches to control one fan. These are hard enough to do without the added headache of two remotes. Any help would be appreciated.

Your remotes should work much like the motion sensors in https://www.askmehelpdesk.com/showthread.php?t=9511, which I answered yesterday. Wire the fan receiver to the hot wire at the fan. Leave the switches in one of the on positions. As long as nobody turns one of the switches, a single remote should work. You could even remove the switches and permanently the wires in the correct position. You must leave access to any box with electrical connections in it, but can cover it with a plain plate.