Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New hot water heater installed, but no hot water pressure. Plenty of cold water?
[ 11 Answers ]
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Low water pressure after new water heater installed.
[ 0 Answers ]
I guess it's low water pressure. If someone is taking a shower you can't even wash your hands in the sink because there's barely any water coming out. It could be the bathroom sink or the kitchen sink. If someone flushes the toilet you loose almost all the water in the shower for a few minutes....
Installed a new water heater and have excellent HOT water from every outlet except 1
[ 16 Answers ]
The shower in the master bathroom. The sink has plenty of hot water, but not the shower. I had it before I replaced the old water heater, and now I have none. Can someone give me some advice on what to do?
Installed new water heater, no water pressure.
[ 1 Answers ]
I just installed a new electric hot water heater and everything seemed to be running smoothly... the tank filled up fine and was heating the water, until I went to have a quick shower the next day and there was no hot water pressure. The cold pressure is perfect, just no hot. This is not just in...
New hot water tank installed, loss of water pressure
[ 1 Answers ]
After the installation of a new hot water tank, we have less pressure which is only noticeable when trying to fill the tub. Any ideas? Thank you. View more questions Search
|