Ask Experts Questions for FREE Help !
Ask
    becca0212's Avatar
    becca0212 Posts: 4, Reputation: 1
    New Member
     
    #1

    Sep 22, 2010, 05:47 PM
    Low water pressure after new water heater installed.
    I guess it's low water pressure. If someone is taking a shower you can't even wash your hands in the sink because there's barely any water coming out. It could be the bathroom sink or the kitchen sink. If someone flushes the toilet you loose almost all the water in the shower for a few minutes. I've checked the water valve at the street. It's turned all the way up. What else should I do? It's becoming annoying. Does a water softener tank affect water pressure?

Check out some similar questions!

New hot water heater installed, but no hot water pressure. Plenty of cold water? [ 11 Answers ]

Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....

Low hot water pressure through the whole house even ater replacing water heater [ 2 Answers ]

I'm still experiencing low hot water pressure even after replacing the water heater. When you first turn on the faucets the pressure will be fine but within a few seconds it drops again.

Low water pressure in shower after replacing water heater [ 4 Answers ]

We have almost no pressure with the hot water in the shower after replacing the water heater. Cold water is OK, we have flushed out the pipes (refilled the water heater) and still not any better. What next? We have look on line for answers but to no avail.

Low water pressure kitchen sink after water heater flush [ 4 Answers ]

I flushed my water heater today. When I was done, the water pressure at all the sinks, tub, washer, dishwasher, etc worked just fine, except for the kitchen sink. I took out the aerator and confirmed there was nothing there. Ran the water without the aerator in and water pressure is still about...

Installed new water heater, no water pressure. [ 1 Answers ]

I just installed a new electric hot water heater and everything seemed to be running smoothly... the tank filled up fine and was heating the water, until I went to have a quick shower the next day and there was no hot water pressure. The cold pressure is perfect, just no hot. This is not just in...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.