Ask Experts Questions for FREE Help !
Ask
    zzt0p's Avatar
    zzt0p Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 7, 2011, 02:23 PM
    My york furnace won't fire. Any thoughts?
    My york furnace inducer fan starts the glow unit fires and there is 9+ volts at the main gas valve seliniod but it won't fire. Any thoughts?

Check out some similar questions!

My house furnace won't fire [ 0 Answers ]

House furnace won't fire,pilot is lit but won't ignite gas burners at bottom of furnace.When I turn power on again the water pumps start but no ignition.

York furnace burner won't stay lite [ 1 Answers ]

Hello I have a older york furnace gas converted to propane it been great when turning it on everything works but when the burners light they go out in about 3 to 5 secounds dose it three time then goes to call for no heat code I've put in new flame sencor sill same think can you help thanks jim...

Heil gas furnace won't fire up [ 7 Answers ]

I have a gas Heil furnace model # NUGS125AK01. It won't light up. The ignitor lights and then goes out. Then it tries over and over and never lights. My buddy began banging randomly inside it and it fired up. I knew it wouldn't last and sure enough today it doesn't work again. I read one of...

York 90+ won't fire [ 17 Answers ]

Have a york 90+ upflow 100,000btu natural gas unit, won't fire unless I pull the tube from the combustion motor leading to the pressure sensor and put a vacume on it then it will fire and cycle, any suggestions ?

Goodman Furnace Issue - Heater won't work, no fire [ 1 Answers ]

My Goodman heater won't fire up. When I turn the heat on, the sequence of events: 1) Small fan at top section turns on. 2) Heating element turns on, bright red. The system sounds like it is trying to turn on. 3) Then the bright red goes off. The fire does not light. The fan does not start 4)...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.