Ask Experts Questions for FREE Help !
Ask
    missouri2011's Avatar
    missouri2011 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 4, 2011, 08:16 PM
    I have a heil furnace that comes on for 2 minutes and goes off the green light flashe
    I have a heil furnace that stays on for 2 minutes and goes out.the furnace flashes 4 lights what could it be
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Feb 4, 2011, 08:26 PM
    You should have a list of trouble codes on the blower door to tell you what's wrong.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil furnace burners go out after a few minutes [ 4 Answers ]

Have A Heil Furnace Model # NULK105AH02 : Serial number: H51118647, 105,000BTU Been having problems getting the burners to stay lit. We've cleaned it completely, put a new electronic switch on it. Still not working properly. It goes off propane, instead of natural gas. We are getting black soot...

Heil Furnace burners won't light. [ 0 Answers ]

Hi, I have a Heil furnace, propane, in my shop 125,000/100,000 BTU. Looks to be an older furnace but came out of a remodeled house where it was working. 2" PVC exhaust, intakes in building. TStat is newer (used in house) confirmed good, furnace turns on, exhaust fan runs, igniter makes sparking...

What are the codes for the blinking light on a 2004 heil furnace? [ 0 Answers ]

2004 heil gas furnace. The heneywell gas valve blinks twice. If I turn the switch off( on the valve ) the blower comes on, then turn the switch back on and the unit operates. What are the codes for the blinking l.e.d.

I have a Heil NTG 3/FBF Furnace. My pilot light is not on. [ 4 Answers ]

I have a Heil NTG 3/FBF Furnace. My pilot light is not on. The fan will come on if I turn it on but with heat, but only cold air will blow. The pilot will not ignite all. I've tried cutting off power to the furnace and closing the gas valve and leaving it alone for 5 to 10 minutes. Then turning...

My furnace won't light diagnostic light is green, & yhe thermostat says heat is on [ 1 Answers ]

Any ideas what's wrong it's a coleman mobile home furnace

View more questions Search