Ask Experts Questions for FREE Help !
Ask
    kitchenpatrol's Avatar
    kitchenpatrol Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 2, 2011, 10:01 PM
    I have no hot water pressure but the cold water is fine what could cause this?
    I only have a slow drip on all hot water sides of house. Outside temp is about 2 degrees. All pipes are copper and located on inside walls. I have verified that pilot light is on to hot water heater. I have also verified that it is cycling on and off. What could it be?
    oneexception's Avatar
    oneexception Posts: 92, Reputation: 10
    Junior Member
     
    #2

    Feb 2, 2011, 11:05 PM
    Have you recently shut off any outside spigots? Is it possible you shut off the cold water supply to your water heater without knowing it?
    ChazC's Avatar
    ChazC Posts: 5, Reputation: 1
    New Member
     
    #3

    Feb 2, 2011, 11:27 PM
    Sounds to me like your outlet side of your hot water heater (the HOT side)might be clogged with a mineral buildup(this is especially common in homes with very hard water and tankless coils.
    zmoto2001's Avatar
    zmoto2001 Posts: 1, Reputation: 1
    New Member
     
    #4

    Feb 4, 2011, 10:00 AM
    I have the same problem. No pressure at all for the hot water in the kitchen but the cold water is fine. All other faucets throughout the house are fine for both hot and water. What could it be?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #5

    Feb 4, 2011, 10:48 AM

    What's the outside temperature. Sounds like hot water supply to kitchen is frozen. Lines probably in exterior wall. Hot will freeze before cold. Open cabinet door so heat can get to exterior wall. Provide additional heat if possible. Hope pipe has not busted.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low water pressure in bathtub only hot or cold sink and toilet work fine [ 9 Answers ]

My bathtub/shower has low water pressure all others are fine in house even the sink in the same bathroom has good pressure. I removed shower head and knobs. Pressure is still low coming out of copper that stick through walls?

Low hot water pressure.kitchen & bath. Cold pr. Is fine. [ 5 Answers ]

I have low hot water pressure in my kitchen sink and bathroom sink. My cold water pressure is fine. I have taken the nipple off the hot water line, out of the hot water heater. No clog in that line.

My hot water pressure sucks but my cold works fine [ 1 Answers ]

I recently moved into a 100+ year old house and ever since I moved my hot water pressure just sucks. I tried clearing out the faucets screens and shower head but nothing changed. I don't know what to do and I really don't want to pay for a plumber that "thinks" he might now what's wrong. I tried...

Low Cold Water Pressure in Bathroom Sink, Hot works fine. [ 2 Answers ]

I have read many of the threads regarding low cold water pressure, but haven't yet found one that specifically applies to the bathroom sink. The house was built in the early 1900's, but was renovated in 2005 so it has copper pipes which cant' be much more than 2 or 3 years. The sink has separate...

Lost Hot Water Pressure but Cold Water is fine [ 1 Answers ]

Hi, We had a flood in our laundry room earlier today when the aquarium I was siphoning into the nearby sink started to siphon onto the floor instead (the hose came out of the sink and was draining water onto the floor). I didn't realize this, and suspected a leaky pipe when I saw the water...


View more questions Search