Ask Experts Questions for FREE Help !
Ask
    tldrop's Avatar
    tldrop Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 4, 2011, 07:54 AM
    Heat cuts on & off.fan continues to run.relay has been replaced twice.
    Heat cuts on & off fan continues to run.relay has been replaced twice.what else woul cause this.

Check out some similar questions!

Fan continues to run after heat shuts down [ 1 Answers ]

I have a Bryant heat pump and the blower continues to run about 10 to 15 minutes after the heat coils shut off. The air gets really Cold before blower shuts off. Anyone out there that can give me some advise?

Trane heat pump fan continues to run when temp set is reached shuts off if lowr temp [ 0 Answers ]

When on heat and temp set is reached the fan continues to run cold air. Fan will shut off if temp set is lowered 2 degrees. Heat pump is Trane, thermostat is digital white rogers . A similar system, less BTU, shuts off when temp reached.

AC blow fan continues to run [ 1 Answers ]

My AC fan continues to run but the outside compressor want come on unless I manually engae the contact coil. I'm not get power to the two wire that make the out door coil engage. I think I've traced it back to the indoor unit witr the two wire connect to to a electrical board where the thermostat...

Tempstar heat pump AHU fan continues to run when t'stat satisfied... [ 10 Answers ]

I have a Tempstar split system multi stage heat pump with a Honeywell RTH7400D108 thermostat. My problem is intermittent and is that the AHU fan continues to run after the t'stat reaches the desired temperature. The outdoor unit will cycle back on when called for or I can open the breaker to the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.