Ask Experts Questions for FREE Help !
Ask
    arrrrrrgh's Avatar
    arrrrrrgh Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 3, 2011, 06:29 PM
    Break light switch
    Where is the break light switch located on the 95 ford escort
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Feb 3, 2011, 06:49 PM
    BRAKE light switches are almost always under the dash, in front of or behind the brake pedal arm. Some push in, some allow the switch to drop as the pedal is depressed. Look for a small switch with a couple of wires. How do you now it's the switch if you haven't tested it?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #3

    Feb 3, 2011, 06:50 PM

    On every car I have ever looked at... its usually at the top end of the brake pedal arm... up near the steering column. Can be black plastic but is usually whaite and will have a couple wires coming from it. You can see where the brake pedal arm contacts it if you look with a flashlight.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #4

    Feb 3, 2011, 07:00 PM

    The brake switch is located near the top of the brake pedal. Unplug the 2-wire connector, remove the retaining clip and nylon washer, then slide the booster pushrod off the pedal pin just enough to allow switch removal.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I replaced pull switch lights with recess but the wall switch won't turn off the light [ 2 Answers ]

I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...

Swapping Dual Light Switch for Dimmer/Three Position Switch for Ceiling Fan [ 1 Answers ]

I am trying to swap out a dual switch for a switch that has a dimmer for the ceiling fan light and a three position switch to control the fan. The original wiring had white to white on switch, black to black on switch, and one black from light connected to the top switch pole and the other black...

Separate Fan light switch, fan switch and switch for can lights to one location [ 2 Answers ]

I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.

New dimmer switch will not dim light - taking power from 3 way switch [ 2 Answers ]

New dimmer switch will not dim light - I am trying to hook up a dimmer switch in a electrical box that already contains a three way switch. I am trying to take power from the three way switch to power the new dimmer and light. The way it is hooked up now the new light works but will not dim with...


View more questions Search