Ask Experts Questions for FREE Help !
Ask
    jpho128's Avatar
    jpho128 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2011, 01:05 PM
    My York furnace is not working
    I am having the same issue with my York furnace, red light blinking 3 times. It has been very cold at night, kids are freezing, could anyone help us out??
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Feb 1, 2011, 01:33 PM

    Jpho, on the inside of one of the removeable panels you should have a diagonistic chart that will tell you what "three blinks" mean. Good luck
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Feb 1, 2011, 01:39 PM

    According to this York Furnace Error Codes | eHow.com 3 red falsh is normal operation. Carefully check again or have another person observe. Bif dif between 3 flashes and 4 with a York
    jpho128's Avatar
    jpho128 Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Feb 2, 2011, 11:54 AM
    Comment on parttime's post
    parttime, the 3 blinks appears to represent "pressure switch stuck open". What is a pressure switch and where is it located?
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #5

    Feb 2, 2011, 01:07 PM

    york pressure switch - Google Search

    Here's a link, should look something like this. Good luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York Stellar Furnace Heating up Furnace Room to 110 Degress? [ 2 Answers ]

I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...

York Furnace not working, 6 flash error code - HELP! [ 3 Answers ]

Hi, I have a 6 year old york furnace that doesn't seem to be working anymore. The burner turns on for 20 sec each time up to 3 times then goes out. I took out the ignition sensor and cleaned but doesn't seem to work. When I look at the error code, it gives me 6 flash lights. Any Help would be...

York furnace not working [ 1 Answers ]

My york furnace indicator light flashes 4 times. Does not work it has a new filter. Home olnly 4 yrs old

York Furnace nothing is working [ 1 Answers ]

York Furnace, power to unit on but no LED lights or flashes.

View more questions Search