[knpbarker]

I have a nutone fan/light unit. There is 2 whites, 1 black, 1 blue and 1 green coming out of the unit. From the switch it runs up into a junction box. From the junction box I have a green wire which is connected to a bare wire grounded, then I have a black, a red and a off white/tan wire. What goes to what? It is a 2 switch fan. Thanks.

[hkstroud]

I don't think I follow your post completely.

What I am reading is that you have Nutone fan/light combo. It has two white wires, one black wire, one blue wire and one green wire.

You have a switch box on the wall and a ceiling box. You have a 3 wire with ground cable between the two.

In the ceiling box you have a black wire, a red wire, a white wire and a bare ground wire. You have a green wire connected to the bare ground and to the box.

Is that correct?

it is a 2 switch fan

What does that mean?

[Handyman2007]

The two white wires are neutral. The blue is probably the fan and the black is the light. The Green wire is ground.

[knpbarker]

Yes, that is correct.

I meant that I have a switch to turn on/off the light and a second/seperate switch to turn on/off the fan.

[hkstroud]

There must another black and white wire in either the ceiling box or in the switch box. Post back with that information and I will draw you a diagram of the proper wiring.