Pilot light for lennox G12Q3-110-6

mancanf Posts: 2, Reputation: 1

New Member

Jan 30, 2011, 01:17 PM

Pilot light for lennox G12Q3-110-6

The burner goes on and off but will come after awhile and stay

repairman_red Posts: 37, Reputation: 1

Junior Member

Feb 14, 2011, 04:43 PM

Probably a weak thermocouple

Add your answer here.

Check out some similar questions!

Pilot light on our Lennox G40UH(X) Series furnace won't light [ 24 Answers ]

The pilot light on our Lennox G40UH(X) Series furnace won't light. We went through the steps to restart the furance. The blower turns on for a few minutes but blows cold air and the pilot light never comes on. How can I fix this?

Lennox g12q31371 furnace pilot will not light? [ 1 Answers ]

Pilot will not light? It seems it has not enough preasure to lite-up. It is getting gas/electric but acts like not enough gas out pilot tube? Any ideas anyone, it is getting cold tonight, please help.

Pilot light on our Lennox G40UH(X) Series furnace won't light [ 1 Answers ]

We have a G40UH(X) by Lennox which is about 5 years old. The pilot light on our lennox G40UH(x) series furnace won't light. The blower turns on for a few minutes but blows cold air and the pilot light never comes on. The LED #1 light is off and the LED #2 light is slow flash. May I know how can I...

Pilot light for Lennox G1203-110-4 [ 3 Answers ]

Where does the flame go on this old Lennox model?

Lennox G12 Pilot light problem [ 2 Answers ]

Hello, I have a Lennox G12 furnace. The pilot light blows out every once in a while.(An intermittent problem) The furnace is located in the hallway in the house. There are no drafts or chances of wind that could possibly blow out this pilot light. It is getting a bit frustrating because it is...