Ask Experts Questions for FREE Help !
Ask
    Overton210's Avatar
    Overton210 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 28, 2011, 02:44 PM
    No blower motor power in heat
    I am working on a fedders corporation electric air handler and I cannot get the blower motor to turn on with heat. It is a single speed blower set up and the blower comes on when switched to fan and on auto with the ac. Installed new digital thermostat, blower relay and contactor. Contactor gets energized and power to the heat strips just don't know why the relay isn't getting energized when called for heat
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #2

    Jan 28, 2011, 05:58 PM
    The blower is brought on by M1 & M2 on the heat sequencer(heat mode). Its not uncommon to have that part go bad. When the heat sequencer closes it send voltage through the normally closed contacts on the blower relay. I hope this helps good luck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My heat and blower motor will not come on what do I need to check? [ 2 Answers ]

What do I need to check if my heat will not work?

Heat pump blower motor [ 2 Answers ]

I just purchased a goodman heat pump and noticed that the fan cuts on very quickly (like about 2 seconds) after the outside unit cuts on. It seems like it's blowing out cold air at the start and would be beneficial if it could wait more time before blowing air. Is there an easy way to adjust the...

Goodman furnace will ?heat motor? And blower motor will run but not at same time [ 2 Answers ]

I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?

Blower motor power [ 1 Answers ]

Hello , I have a magic chef furnace that was working and all of a sudden quit. I am getting power to the furnace, and motor is good because I removed motor and had it professionally tested. I was not getting power to blower motor but could hear the click from the relay, I tried both...


View more questions Search