Ask Experts Questions for FREE Help !
Ask
    RobBradley's Avatar
    RobBradley Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2011, 03:01 AM
    Trane furnace problem.
    My trane XE 90 is short cycling, and the indicator light on the bottom panel is flashing 3 times in a row. It can not keep up to the set temperature. What can I do as a home owner to fix the problem?

Check out some similar questions!

Trane Gas Furnace Problem [ 13 Answers ]

I recently experienced a problem with my heat. I have a programmable thermostat and noticed that the heat wasn't on when it was suppose to be. The temperature was set to 75 but the temperature in the room was only 68. I canceled the program and manually set the temperature again to 75. The heat...

I have an XV90 Trane Furnace with a problem. [ 0 Answers ]

I have an XV90 Trane Furnace that will light the first burner but will not light the burners across to the heat sensor. It is doing this about 8 out of 10 tries and I have to turn the power off and back on to get it to try again. What would cause this? I know this is not suggested but I can...

Diagnose problem of trane furnace xl80 [ 3 Answers ]

My furnace was in 2ft. Of water for about 24 hours. I replaced the blower motor and start capacitor because it shorted out. The blower will still not start. The 120v/24v AC transformer and the 5 amp fuse in the blower compartment check okay. Should I assume that the circuit board is bad and needs...

I have a Trane XL80 Furnace blower problem [ 0 Answers ]

I have a Trane XL80 Furnace. The blower doesn't seem to put out much force. I'm wondering if there is a way I can speed it up? In the winter it seems to do fine but in the summer it doesn't seem to keep up. I've replaced centeral air compressors since and have been told they are the right size but...

Trane XR80 furnace intermittent problem [ 4 Answers ]

I have a Trane XR80 furnace. The furnace works fine sometimes, and other times is will not light. I get no error on the LED indicator on the main board. The ignitor gets hot but the furnace will not light. It appears that there is no gas getting to the burners. Any suggestions would be greatly...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.