[dlorenzo]

I am looking to replace an automatic ejector pump in my basement which is currently operating manually(In order for me to use pump I have to exit my apartment, plug it in, then unplug after it has drained). Can anyone tell me the life expectancy for these types of pumps?(The pump has been replaced 4 to 5 times in about a 20 year period).Is this normal? Also... Can anyone recommend a few of the most reliable and cost effective companies out there who offer ejector pumps? The pumps have been replaced by the home owners(My In-Laws)in the past. In order to help out, I have now taken on this responsibility. What will I need to know? And Who can I rely on(manufacture)in order to make sure I am making the best purchase possible? Any help would be greatly appreciated.

[ballengerb1]

A good ejector pump would likely be cast iron for about $350 and up. Mine has lasted 20 years. Zoeller makes some of the best but you need to buy the right one for your application, it will pump automatically like your used to Waste-Mate 270, 4270 | Zoeller Pump Company

[Milo Dolezal]

I have been installing Zoeller sewer ejectors for over 30 years. I consider them the best in the field. They come with automatic float. Actually, I never heard of sewer ejector pump that operates manually. Go to Zoeller Corporation to see what they make. Pumps will last about 7-10 years. Don't forget to install check valve as well. I think replacing 3 pumps in 20 years is normal. Let me know if you need us to lead you through installation process. Back to you. Milo

[dlorenzo]

Hello ballengerb1... thanks for the advice and link provided. I'll look into the Zoeller website and see if I can locate a compatible automatic model. Looking to shop and compare, any further suggestions will also be greatly appreciated.

[Milo Dolezal]

2" Zoeller M267 pump is what you are looking for...

[dlorenzo]

Thanks for the reply Milo. What I meant by operating manually is, if I leave it plugged in it will continually run,didn't mean to mislead. I'm just learning about ejector pumps and any help which comes my way would be greatly appreciated. Looking over Zoellers website, and, it looks like I may be able to find some pretty good choices(I'd still have to research exactly what I need)as far as durability. Still looking to compare, any additional suggestions would be greatly appreciated. After reading a few posts on Ejector pumps and the problems some members may be expierirncing and I came across Little Giant(I believe that's the name). Any one know how they would compare?

[mygirlsdad77]

You could save yourself some money and just replace the float and hope the pump last a few more years. If the float is non-replaceable and the float switch is stuck in the closed position, you could add a float assembly and plug your pump into it. Fairly cheap and easy to do vs replacing the complete pump.

[ballengerb1]

MGD is right, I did that for myself for $24 at Menards

[dlorenzo]

Float switch sounds like a good trick. Will take it into consideration should I decide to go that route.