 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
ColemanFurnace won't stay lite and flashes once
Our furnace coleman furnace model DGAA077BDTB was pushing out cold air,the furnace will lite,by this I mean glows really bright then I get a blue flame then about 20 seconds later the flame will go ou then the blower motor clicks in and it seems to try and relight itself does this a couple times then will stop but blinks once after it stops. It is a Coleman forced heat. Please give us some help
|
||||
Check out some similar questions!
I have a heat and glo propane heating stove that came with a the house I moved into. It did not work, pilot light would stay on but unit will not light. I have replaced the thermal pile with no success. I have now replaced the gas valve and the pilot light won't stay on. Any ideas as to what...
The furnace comes on and the flame lights. The blower comes on and the flame goes out after a few minutes the flame will relight and go out again. Then the indicator light starts blinking.
I have a Maytag Neptune MDG3000AWW gas dryer that will lite in all three modes (intellidry , time dry/air fluff, and intellidry ) but will only stay lite of 8 to 10 seconds. After ltwo or three minutes it lites again for another 8 to 10 seconds. Takes all day to dry a load.
I have a beckett afg oil furance when I hit the reset button it lite run reach the temperature in the house but when temparture drop in the house the furance will lite but cut off when try to startup again it lite but just go out
I have a older heil furnace (Model#867.769445) about 20 years old. When the pilot turns on after a few seconds the burners light, then after a second or two they shut off, on again, and off. They will do this continually until finally they stay on or the furnace stops trying to heat. I have also...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
