Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Changing furnace fan speed to change delta
[ 7 Answers ]
I have a 12 year old Goodman furnace. About 3 years ago, I asked a service tech if there was anything that can be done to get warmer air out of the registers. He said he slowed the blower speed to get a higher temperature rise. I had the ductwork replaced and it is smaller than the original...
Hampton Bay Ceiling fan: fan speed pull chain
[ 2 Answers ]
The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?
3 speed ceiling fan only has 1 speed
[ 3 Answers ]
I have a 3 speed Hunter ceiling that I rarely turn off and all 3 speeds had been working. I recently turned it off and when I turned it back on, only the high speed is working. I assumed the switch was bad and replaced it. I still only have the High speed. Has anyone had this problem before? ...
I need more speed on ceiling fan
[ 1 Answers ]
I have a hunter ceiling fan. It usually is on about 8hr during the night since I live in the tropics. I don't use the reverse and I have separate switches for the fan and light. The fan is set on max speed always. I need more breeze from the fan so I slightly bent each blade by about 2 degrees and...
Ceiling fan: change capacitor for single speed
[ 3 Answers ]
I have a Loyal Products made in Taiwan fan with melted 4 wire capacitor. The capacitor has blue wire in and red 4uF, white 4.5uF and yellow 5uF wires out. This is connected to a two layer switch by the red and yellow wire. The white capacitor wire connects to a red wire going into the motor. My... View more questions Search
|