 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I want to install an ultra-high efficiency water heater (98%+ efficient). The exhaust runs cool enough that the combustion product water vapor condenses in the exhaust line and needs to be drained. My plumber told me that it was impossible to install this heater, because there is no floor drain....
The fan runs all the time but the unit never lights or heats. Where are the limit swithches that might need to be re-set?
I have a Briant high efficiency furnace i.e Air tight burner compartment, inducer motor And exhaust and intake air from side of house etc. I had similar problems with my gas furnace. I was able to solve the intermittent Problem of the furnace not coming on every time the thermostat called for...
For past few days home temperature drops down approx 6-7C degrees at night so I checked the furnace which gives me sometimes (6) LED signals other times (3) LED signals. I followed the back panel instructions also drain out water from tube connecting to motor and restart, however each time it lasts...
Hi, I have a Concord Gas Furnace with Carrier Central A/C. Today I found out that the blower is not starting whenever A/C kicks in. It doesn't auto start for heat either. Tried setting Fan in Always ON mode and still doesn't start. However if I turn off Heat/Cool and leave the Fan in Always ON...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
