 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
When i turn on heater the blower hums then i hit it it starts to turn then it works fine sometimes it gets stuck . How do i fix that?
Can you just replace a 2 wire outlet with a 3 wire? My dau bought an old house that has 2 wire outlets and does not have the money to replace all the wire with 3 wires. We just want to replace the 2 wire outlet with 3 wire and only use 2 wires to do this.
I have a 200 amp panel with a 10/3 wire running to a shed, then hooked to a 110 receptable. My question is can I take the 10/3 wire and change the 110 circuit to 220 ? Thanks Dave
Nordyne model E1EB-015HA How do I check the sequencer's and limit switches what are the omh's values or what should be open or closed on the bench, I have the furance and coils on the bench for testing. Unit blows transformer in service. Was great before I cleaned the cooling coils above the...
I cannot pull out the Disconnect on the lower right side of the inside heating unit of the Intertherm FEH 015H 017H. Does it come completely out? Could it be stuck? It doesn't seem to budge and I'm not that much of a weakling. Thank you for any information. Patt aka pattusa
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
