 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Blower motor kicks on and off when it should be running steady
Coleman model 76808
Blower moor turns on for about 30 seconds and off for about the same length of time. The schematic on the cover shows a different junction connector than the one on the control box. The one on the furnace is square while the one on the schematic is long. |
||||
Check out some similar questions!
Hello to every one, maybe someone can help with my problem. My furnace blower motor will not stop running. When the t-stat calls for heat it blows warm air after the heat cycle the blower blows cool air,so it's kind of working against its self. The only way the blower will shut off is if you turn...
... rheem criterton 2 rgph 10eamer... 100,000 BTU... 80%... 8 years old with the thermostat off the fan stays on all the time... also... no heat... not fireing and so because its not fireing the gas don't come on... please... if you can help... thanks very ...
Okay, so the heating/ac guy cannot get out for a few days, so I started diagnosing things myself. My blower (rheem residential gas/ac unit, less than 6 years old) was slowing down and finally quit. I had the motor checked out and it was dead at this point (very dirty, had been running on very...
Hi, I have a rheem furnace in which the blower motor buzzes but does not run. I replaced the motor, and the capacitor(15/370 MFD) but the same problem persists. The motor that was initially on the system (51-18716-01) is no longer sold so I bought the one that replaces it ( 51-23017-42). The...
We have an older bryant furnace It heats up but the fan runs on and on there is a switch that says summer fan when its on it runs constant if you switch that off the fan won't blow at all help needed soon thanks Michelle
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
