Ask Experts Questions for FREE Help !
Ask
    jonifer's Avatar
    jonifer Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 28, 2010, 03:07 PM
    Hampton bay ceiling fan-romote controlled
    Replaced batteries in remote, neither fan or light is working. Red light on remote comes on when buttons on remote pushed down. What's next?
    atabler258's Avatar
    atabler258 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jan 11, 2011, 11:39 AM
    Is a corporation controlled by FASB?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

I have a Hampton Bay ceiling fan for about 15 years. The lights work but the fan doe [ 3 Answers ]

I have a Hampton Bay with a light. The light works but the fan does not. I can feel a slight hum of the motor and sometimes it appears the blades may move a bit but really there is nothing. It is about 15 yrs old. I have another one like this, same age and it works fine. Before I start taking...

Taking a Hampton Bay Ceiling Fan off the ceiling [ 2 Answers ]

Can you tell me how to remove my ceiling fan off the ceiling. I don't know how to get the cone-shaped piece that is touching the ceiling off. Thank you.

Hampton Bay Remote Controlled Fan - Reversing blades [ 1 Answers ]

How do I reverse the blades on a Hampton Bay remote controlled fan. There is nothing on remote to indicate reversing blades. IT is on a rod from a very high 18 foot ceiling. It has up and dow lighting. Remote has numbers of JUO7078T on it.

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

View more questions Search