 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rheem 80 furnace problems
This is a very intermittent problem. Thermostat calls for heat, draft motor starts, flame ignites, blower starts and heats the house. After 5-10min, blower will stop but the draft inducer keeps running. After 2-3 min flame will reignite, blower will start and heat the house until the thermostat is satisfied. Could this be the limit switch or something else. The unit is about 10years old. Flame sensor was replaced last year, draft inducer was replaced about a month ago.
|
||||
Check out some similar questions!
Rheem heating furnace pilot light won't stay lite.
Hello; I have a 30+ year old Rheem model RGAA forced air gas furnace that has a gas pilot light. When I set the thermostat to FAN, the fan motor turns on and runs until I switch it off. But when I set the thermostat to HEAT, either I get nothing, or the burner and motor turns on for a few...
Trouble with furnace not going through normal heat demand cycle at times. Think cause is in rubber condensate trap. Appears to get debris in trap. Removed 3 inch PVC combustion air piping to see if that would help. Doesn't seem to help a whole lot. At times it works perfect for some days,...
Installed in 2004. Just before the fan comes on the furnace bangs/clunks - sound like someone hitting pipes with a wrench. We have had trouble with ignition. Could this be related? If not, any answers?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
