Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
3 Gang Switch Problem
[ 5 Answers ]
I just bought a new house and when wiring up the ceiling fans noticed that the switches in ine bedroom were not right. In the other three bedrooms the fan and fan light switches are right next to each other and work independently of each other. There is also another switch for an outlet. I also...
Four way switch problem
[ 3 Answers ]
I had a three-way switch that broke. I went out to buy a new one, and not checking in the box, bought a two-way switch by mistake. Didn't have time to get a new one right away, so I installed it so that I could get my lights to work. A couple days later I put in the right kind, but now I have a...
York residential furnace pressure switch problem code stuck switch
[ 1 Answers ]
I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals
Light switch problem
[ 5 Answers ]
I have a light in a room that has constant power to it. There is a switch, with 4 wires, black white red and ground. But the switch has been disconnected by someone else, and I cannot figure out how to run the wires to the switch. I am assuming the red wire is a traveler since on the other side of...
Light switch problem
[ 3 Answers ]
This site has been such a great help I though I would ask you a question about an electrical problem we are having. I have a home that is 2 years old and noticed from day one that we had some light switches that would arc slight when they were turned on. It turned out that the were wired using the... View more questions Search
|