Ask Experts Questions for FREE Help !
Ask
    kremesaver's Avatar
    kremesaver Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 6, 2011, 09:34 AM
    Is a compressor fan needed for the heat to work?
    My AC unit outside my house was stolen/vandalized for the copper. Is that unit needed for the heat to work?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jan 6, 2011, 10:25 AM
    If it is a straight AC and gas Heat, the two only inter-connect through the blower and T'stat. For the time being, plug the lines to keep the water out and just use the heat cycle. You only need a 2 wire t'stat so you may have to either change or rewire the existing one. Your Homeowners insurance should cover the loss-the deductible
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat pump outdoor fan runs not compressor voltage at compressor good. New compressor [ 1 Answers ]

Have a new compressor. Just replaced fan runs compressor does not, have voltage at the compressor plug? What could stop from coming on high side and low side equal at 100psig.

Goodman cpl t30-1a heat pump, heat not working/no compressor or fan operation [ 5 Answers ]

The thermostat is operating/clicks on when desired temperature is more that the actual, but no action at the compressor or fan. We even switch thermostats from other unit in house and both operate the other unit correctly.

Install new t-stat, fan and heat work but compressor will not turn on? [ 2 Answers ]

Hello all. I replaced our old turn dial thermostat with a programmable digital thermostat (Honeywell thx6400b). I turned off the breakers for the house prior to opening up the old thermostat, where I found a green, yellow, red and white wire attached. I removed the old t-stat and hooked up the...

First my fan wouldn't work now my compressor won't come on [ 1 Answers ]

I have a gas heater on my central air and heat unit.I changed my thermostat to a honeywell RTH110B non-programmable. My system has 4 wires(red,green,white,and yellow).I hooked the wires up according to the colors and letters.My central air and heat unit is a Ruud it has a honeywell control by the...

First my fan wouldn't work now my compressor won't come on [ 3 Answers ]

At first my fan stopped working on my central air and heat unit.My compressor kept running outside when the switch was on auto or on.I changed the thermostat the compressor kept running ,but the fan would not come on inside the house.This morning the fan came on inside the house but the compressor...

View more questions Search