 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
New goodman heat pump with electric banks back up
When cold outside around ten degrees banks will turn on until thermastate is within one degree of satifided, then outside unit will turn on and stay on until thermastate dropps and tell banks to kick back in. This cycle will continue until temp outside warms up enough until the heat pump warms the house without banks kicking in Is this right?
Thanks, travis |
||||
Check out some similar questions!
My Goodman heat pump, model GSH130361AD, heat does not switch on (outer unit). When it first went out, the Honeywell T8411R t-stat digital display went blank. First, I tried replacing the stat with other, but they only accommodated 5 wires. Wiring to the Honeywell was 7 wires. I'll come back to...
Goodman heat pump, model GSH130361AD, Goodman AEPF series Air Handler, and a Honeywell T8411R t-stat. After wiring and setting everything up, the A/C works very good. In heat mode the aux heat comes on but the outside unit does not start up. Emergency heat works well too. The units are used...
OK even when its 17*F out I can still here it running at night. So is this a problem? I mean it runs non stop.
The thermostat is operating/clicks on when desired temperature is more that the actual, but no action at the compressor or fan. We even switch thermostats from other unit in house and both operate the other unit correctly.
Heat strip not working on my goodman heat pump
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
