 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a Coleman furnace that decided to start having the alarm go off on me... My brother and I were looking at it, and according to the 'single blink' it has something to do with the attic fan. I have no idea what to do... and I really don't have the money to have someone come in and fix it....
I have a mobile with a forced air Coleman electric heat. The fan will not run in the auto setting (switch by motor in cabinet) but the element will heat up. In manual the fan runs constantly and heat comes on with the thermostat. The heating company recently replaced the sequencers and said we...
Exhaust fan will not shut off after cycle unless you tapp on furnace
Gas furnace model GUH 100AO16 Arcoaire. Furnace runs cycle and heats up to temperature on thermostat but the induction motor does not shut off at the end of cycle which keeps the main fan motor running and blowing cold air. To get this motor to turn off I have to go to the furnace and unplug...
I have replaced the sequencer. The heating elements cut when thermostat temperature is reached but the fan never cuts off. It will change speeds if I turn switch from heat to AC. What could cause this?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
