Ask Experts Questions for FREE Help !
Ask
    Lsjones's Avatar
    Lsjones Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 4, 2011, 04:41 PM
    Janitrol furnace only heats house to 60 even though set to 80. Why?
    Janitrol heat not working properly!
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
    		  
    #2

    Jan 4, 2011, 08:17 PM

    If your header is the question, your post is the answer. Call a professional.

    Please, if you want help you HAVE to describe your problem. Good detail is a must.
    Lsjones's Avatar
    Lsjones Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 4, 2011, 09:31 PM
    Thank you! I am = Rookie :) well, the furnace is igniting, the cycles of the fan are running properly... It simply will not heat our home above 62, regardless of what the thermometer is set to.

    I will call a professional. Thanks for replying.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace only heats up manually [ 0 Answers ]

I have to press the up button on the thermostat to get the furnace to come on. It won't come on at the set point on the thermostat

My rheem furnace heats for a little while then goes out and [ 0 Answers ]

I have a rheem combo a/c and gas furnace with electronic ignitor. When it calls for heat sometimes it will heat then sometimes it will not.When it goes out I have to turn the thermostat off and the back on. I have a fifty-fifty chance of it relighting though it usually doean't run its full cycle...

Electric house furnace won't shut off when I when it reaches the temp set at [ 1 Answers ]

When it reaches its temp the fan won't shut off

My furnace heats up for about 15 minutes and then shut off [ 1 Answers ]

I have a Goodman Model# GMP075-3 Serial #9501043865 My furnace heat up for about 15 minutes and then goes out. The HVAC Tech replaced the flame sensor and the auxiliary limit switch and that did not resolve the issue, The Tech says that he checked everything he could think of and the heat exchange...

Furnace heats up but no air [ 1 Answers ]

My electric furnace is not blowing out hot air the furnace comes on heats up but not hot air blows out the fan works and blows out air and the ac unit works too:(

View more questions Search