 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a Heil Natural Gas Furnace with smart valve sv9541 that goes off and the valve click as the ignitor glows on and off while lighting the pilot light which then goes out, and back lit?Is this a flame sensor problem? Thanks for advice.
My pilot in my furnace lights and starys lite for a number of days. Then the pilot goes out, usually in the middle of the night. I have changed the thermocouple but still getting the same results. The pilot looks OK. Blue flame about 1 inch long with a slight yellow in the tip. Any...
I need to install a White-Rodgers Universal Standing Gas Valve model 36C03 on a Colemand mobile home furnace model 7670A. The old control which was made by General Controls is absolete and had three small gas lines labeled vent, pilot, and one on top that was not labeled. I can figure out the vent...
Valve was installed 2 or 3 years back and has worked find. I can light the gas pilot light and it has stayed light for days. I has a little yellow in the flame. When the heater is turned on via the thermostat, the valve supplies gas to the main burner, it ignites and the pilot light is either blown...
I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
