Ask Experts Questions for FREE Help !
Ask
    m.solis's Avatar
    m.solis Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2010, 05:11 PM
    Have a honeywell ct3500a4453 thermostat and want to connect a new rth6350d
    Replacing old honeywell CT3500A4453 THERMOSTAT with a new RTH6530D where does the bluw wire go on the new unit?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Dec 31, 2010, 05:24 PM

    It all depends on where the blue wire is hooked to in the furnace. If you can pull the covers on the furnace and let me know where the blue wire is hooked in the furnace, I should be able to tell you where to hook it at the stat. Also, where was the blue wire hooked to the old stat.
    m.solis's Avatar
    m.solis Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Dec 31, 2010, 07:09 PM
    Comment on mygirlsdad77's post
    The blue wire connects to a black wire coming from a relay? O power supply? Inside the furnace.The blue wire at the old unit was connected to "B".
    m.solis's Avatar
    m.solis Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Dec 31, 2010, 07:42 PM
    Comment on mygirlsdad77's post
    Thanks for the reply; I actually just purchased another thermostat (3M brand) that has the "B" connection like my old one... Problem solved! Too bad tech support people from Honeywell had no clue as to how to take care of this!
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #5

    Dec 31, 2010, 10:05 PM

    Thanks for the update, glad you got it worked out.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Connect Honeywell Thermostat in place of old Lennox [ 2 Answers ]

I have a Lennox thermostat 67K4801 with numbers > and 3AAT89B38G1. > (Y1 G. O. R. L. T. C. W1. E.) I just purchased a Honeywell Programmabel to replace the old Lennox. The wiring instruction booklet shows all alternate wiring combination, except how to connect the T terminal. Please help! ...

Honeywell RTH6350D [ 2 Answers ]

I'm installing a Honeywell RTH6350D thermostat. I'm replacing an old thermostat with mercury and only two wires connected to it. Unfortunately, these two wires are not labeled. How would I hook them up to the new thermostat.

RTH6350D I am repalcing a TA 2000 thermostat with a Honeywell RTH6350D. [ 2 Answers ]

The TA 2000 has W2, O, X, R, Y, G, and E. The RTH6350D has O/B, R, Y, G, E, Aux, and Rc. Which wires go where? (I'm assuming that the wires that have similar terminals on both models are just moved across. But the W2, Aux and Rc don't have an equavalent.

How do I wire a new Honeywell RTH6350D thermostat? [ 0 Answers ]

I have an old White Rogers thermostat with 3 wires marked "Y", "R", and "4". Which slots shopuld these wires go into on the Honeywell RTH6350D? I am trusting the associate who assisted me at the store with getting the proper model. My heating system is a 4 zone, gas boiler with baseboard radiators.

How do I connect wires from Janitrol to the Honeywell Thermostat [ 1 Answers ]

How do I connect the wires from a Janitrol to the Honeywell RTH7500 Thermostat. I have the following wires: R Red Y Yellow G Green O Orange W2 White E Beige/Pink C Blue Black wire not connected

View more questions Search