Ask Experts Questions for FREE Help !
Ask
    bwheeler90's Avatar
    bwheeler90 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 28, 2010, 08:16 AM
    Bryant furnace model 113R whistling noise?
    My heater is not working properly. I put a new filter in and it started heating really good and then I woke up this morning freezing. I didn't go check the temp. I grabbed more blankets. Later when I did get up the heater was on and the temp was at 64 and a few minutes later it got uyp to 65. Then the heater started making a loud whistling noise.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 28, 2010, 12:34 PM
    You need to try and find out where the whistling noise is coming from,, get back to us
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a Bryant Plus 90 furnace model # 350MAV048060ABKA. [ 0 Answers ]

"I have a Bryant Plus 90 furnace model # 350MAV048060ABKA. The problem is for the last couple of years we had to reset it once or twice a day. Its giving me a 34/14 code, and I cleaned the flame sensor twice, green wire is attached to the chasis, ignitor works (glows), and normally it would start...

New Bryant furnace makes a rumbling noise [ 6 Answers ]

I purchased a new Bryant 2 Stage furnace last year and it now makes a rumbling / vibration noise when the furnace kicks into the second stage. It seems like it does this when the furnace gets a lot of use. For instance, Today it turned on once or twice and no rumbling/vibration noise. However,...

Bryant Furnace Model # 582ANW024060AAAD [ 3 Answers ]

Bryant Furnace Mode No. 582ANW024060AAAD furnace after running for about 30 min. backfires and eventually the furnace will stop while the blower continuos to run. To be able to restart the furnace you have to turn off the breaker and furnace will backfire again before it will stop. >Moved from...

Bryant Model 350MAV Furnace [ 3 Answers ]

Hi, I recently had a furnace repairman in who told me our inducer on our Bryant Model 350MAV furnace needed to be replaced. He said the total cost would be $1075.00, including $890.00 for the inducer. This seemed high to me. Can anyone give me an idea of what this repair should have cost,...

View more questions Search