Ask Experts Questions for FREE Help !
Ask
    slugaboybob's Avatar
    slugaboybob Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Dec 25, 2010, 10:46 AM
    Trane furnace... I want to blow itup
    Clicking by igniter, trying to ignite... ignites then shuts off.. wiggle wires on top og gas shutoff control and sometimes it relites... works a couple days, same thing all over... I live in NW Indiana, so you know it is getting cold... help me make it through this winter... I promise a new furnace in spring... bob from south bend
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Dec 25, 2010, 12:12 PM

    slugaboybob, sounds like you have a bad connection on the coil, or a bad coil. What trane do you have?
    slugaboybob's Avatar
    slugaboybob Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Dec 27, 2010, 01:47 PM
    OK... BLU108P936B2... the last two may be 82... jammed my pocket knife in where the plug goes in.. been working ever since... any ideas
    slugaboybob's Avatar
    slugaboybob Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Dec 27, 2010, 01:48 PM
    BLU108P936B2... or the last 2 82... I jammed my pocketknife in where the plug goes in and it was been working since... any ideas?. thanks
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #5

    Dec 27, 2010, 02:57 PM

    It appears the pocketknife has temporarily fixed the bad connection. It will probably vibrate loose again, you'll need to see why it's not making contact. Good luck

    Could be as simple as a loose or broken wire.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas trane furnace got flooded and won't blow [ 2 Answers ]

Basement flooded due to heavy rain in central Illinois and pumps couldn't handle the water until after the rain stopped. We dumped water out of the rotating drum and have a fan pointed in to the circuit board to dry it. Tried to turn it and the AC on and heard clicks, but no blowing. It got...

I have a trane xe80 it is blowing cold air need it to blow heat [ 1 Answers ]

Blowing cold hair flames stay on only a few seconds and shuts off meanwhile furnace blows cold air themostat is set at 70

Do trane gas Furnace have belt and how to fix trane gas Furnace [ 1 Answers ]

I have trane gas Furnace and its stopped working the pilot is not working its keep shutting off and also the switch on and off is working but the pilot and burner is not working what should I do ?:(

Furnace won't blow out air [ 2 Answers ]

My furnace acts like it's going to kick on but the blower never starts up. The furnace is only about three years old and specifically for a mobile home. What could it be?

Trane gas furnace only blow cold air [ 3 Answers ]

My 10 years old trane gas furnace would not blow out warm air, only cold air. I checked gas is on and electric switch is on. Every thing seems normal. It may be the ignition problem. How can I find out? Your help is greatly appreciated Bass

View more questions Search