Ask Experts Questions for FREE Help !
Ask
    sivle50's Avatar
    sivle50 Posts: 3, Reputation: 1
    New Member
     
    #1

    Dec 14, 2010, 01:02 PM
    Snowblower pushes snow out the sides
    Have a Sears 8HP /26 inch. Snowblower that seems to push the snow out the ends instead of toward the middle . I just got this at the end of last year and I changed the belts and shoes
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Dec 17, 2010, 10:23 AM

    Hi,
    Sounds like the auger may be turning backwards, which would be a belt on wrong. Could be the shear pins though; bolts that secure the auger halves to the shaft and meant to break before something more serious does.
    Peace,
    Clarke
    sivle50's Avatar
    sivle50 Posts: 3, Reputation: 1
    New Member
     
    #3

    Dec 17, 2010, 12:30 PM
    Comment on crigby's post
    The belt can only go on one way and the shear pins are intact . I thought the auger might be on backwards ,but the shear pin holes would not match up . Thanks for the comment , I will keep trying to figure it out .
    sivle50's Avatar
    sivle50 Posts: 3, Reputation: 1
    New Member
     
    #4

    Dec 23, 2010, 08:32 AM
    Comment on crigby's post
    Finally figured out the previous owner had put the augers in backwards . I took the front off and reveresed the auger and it works great now .
    candive's Avatar
    candive Posts: 1, Reputation: 1
    New Member
     
    #5

    Feb 25, 2012, 11:14 AM
    How can I tell if my augers are on backwards?
    Should they roll up or down at the very front leading edge?
    Got stomped on with snow last night it took me at least twice as long to blow driveway.
    Please and Thank you very much.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snow chief snowblower [ 1 Answers ]

Hi, I have an old snow chief snowblower, probably 12+ years old. I have to look for the model numbers but what I really would like to know is are there any sites out there for parts and manuals? Thanks, Darryl

Snowblower won't throw snow [ 3 Answers ]

Craftsman snowblower won't throw snow, auger not spinning

Snow blower won't throw snow impeller works auger works new belt pushes up the chute [ 11 Answers ]

The impeller works the auger works put a new belt on the snow starts to come out the chute goes about six inches plugs no broken pin checked all I could

Snowblower leaves a trail of snow behind? [ 5 Answers ]

Hi, I just bought a 2006 Ariens 11528 snowblower. I've used it for two storms now and it leaves a trail of snow behind at every pass up and down of my driveway. It acts like it can't take in and discharge all the snow so it pushes it out the sides thus leaving a trail left and right as it travels....

Snowblower leaves piles of snow [ 1 Answers ]

Hi, I just purchased a Craftsman 10 hp snowblower and it leaves a pile line of snow approx. 6 inces deep only on the left side of the blower. The shear pins are fine. Can anyone give some suggestions as to what may be the cause of this problem. Thanks.


View more questions Search