Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Kenmore elite washer burnt contacts in timer
[ 0 Answers ]
model 110.15962401- I think built by Whirlpool - less than 5 years old. 3-speed motor. First sign of trouble was it tripped the 20A circuit breaker on slow / intermittent setting. Now it's agitating without filling, not spinning in perm press cycle, randomly changing agitation speeds. I removed...
Kenmore Elite Dryer Timer Wraparound
[ 0 Answers ]
We have a Kenmore Elite Oasis gas clothes dryer, model 110.77042600. When in an Auto Dry cycle, it sometimes does not stop when the timer display reaches 0 (zero). In fact, we have found it still running with the timer display showing 93. So it wrapped from zero to 99 and kept going. We know that...
Kenmore washer smells like burnt rubber and won't spin
[ 1 Answers ]
I have a Kenmore heavyduty 80 series washer that will not do the spin cycle as of two days ago. I can still wash but it will drain leaving the clothes still wet. When it is supposed to be spinning I can hear the clicks and I can also hear the motor as if it should be spinning. The odd thing is I...
Kenmore Elite H3 model 110 gas dryer, burnt smell
[ 1 Answers ]
I just started to run my dryer when I noticed a burnt smell coming from the laundry room. That was the only thing running (less than 10min). It doesn't seem to smell from behind the unit but it does inside. I always change lint before/after every use. Any idea's? View more questions Search
|