 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
kenmore elite washer burnt contacts in timer
model 110.15962401- I think built by Whirlpool - less than 5 years old. 3-speed motor. First sign of trouble was it tripped the 20A circuit breaker on slow / intermittent setting. Now it's agitating without filling, not spinning in perm press cycle, randomly changing agitation speeds. I removed the timer and opened it - there are several burnt contacts! Obviously I need a new timer, but WHY would this happen? Is it just a bad timer, or is there a deeper problem?
|
||||
Check out some similar questions!
I have a Kenmore Elite #11064942300, when Ipush the start buttun I can see the mechanism in the back of the dryer timer housing spin but the dryer will not do anything else. When I release the start button the mechanism stops spinning. Any suggestions?
We have a Kenmore Elite Oasis gas clothes dryer, model 110.77042600. When in an Auto Dry cycle, it sometimes does not stop when the timer display reaches 0 (zero). In fact, we have found it still running with the timer display showing 93. So it wrapped from zero to 99 and kept going. We know that...
I have a Kenmore heavyduty 80 series washer that will not do the spin cycle as of two days ago. I can still wash but it will drain leaving the clothes still wet. When it is supposed to be spinning I can hear the clicks and I can also hear the motor as if it should be spinning. The odd thing is I...
I just started to run my dryer when I noticed a burnt smell coming from the laundry room. That was the only thing running (less than 10min). It doesn't seem to smell from behind the unit but it does inside. I always change lint before/after every use. Any idea's?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
