Check out some similar questions!
Harcraft tub-diverter stem
[ 3 Answers ]
The Harcraft tub diverter stem appears to be captive due to a small metal pin that allows the stem to only rotate 90 degrees. The pin protudes into a slot on the bottom of the valve body,much the same way the clip on a Moen faucet protudes into the slot. There is a packing nut but it serves no...
Grohe tub diverter trouble. Water leaking from wall/base of diverter
[ 8 Answers ]
We have a grohe tub shower set up. The Tub Diverter is leaking from the wall/base of the unit with both the shower and/or tub running, and the shower head runs while the diverter is filling the tub? Any suggestions?
Removing a tub diverter stem
[ 1 Answers ]
I can't seem to be able to remove a defective Sterling Diverter Stem from my bathtub. I have sprayed it with WD-40 for about 2 weeks. Is there something I can use to free up the threads. It is a brass fitting into a copper elbow. I am afraid if I use too much pressure it will break off in the...
Kohler diverter stem (I think part #30139) won't shut off water to tub
[ 6 Answers ]
I have a kohler vavle body and I took off the diverter stem with the intention of replacing it, as I wanted to put universal fit handles on, and the end of the stem was worn down (see pics). This is a three handle system. When I removed the stem, (after unscrewing the nut with a stem wrench)...
Diverter stem installation - three handle shower & tub faucet
[ 4 Answers ]
The house is well over 25 years of age and I have replaced both hot and cold water valves and tub faucet without removal of bath and shower stall tiles - still look good. Purchased a diverter stem (Galtmaster tub and shower models - 1963 to 65). With the old diverter I would turn clockwise to have... View more questions Search
Add your answer here.
|