Check out some similar questions!
Pt 50lc13 panasonic
[ 2 Answers ]
When Tv is first turned on there is vertical pink/white/purple lines; no picture; but the sound works. This is the same for all inputs. After a few minutes the picture will come on and the TV works. I called panasonic, they told me to reset TV by pushing the vol - on TV console while at same time...
Panasonic pt-50lc13 TV power supply?
[ 1 Answers ]
The TV was working fine, then it stopped.. power on light and lamp light flash on and off, unplug and restart... tv works for a minute then stops again... any ideas... thanks
Furnace stays on for a min then turns off
[ 3 Answers ]
We have a Wesco furnace all the model numbers are worn off so no help there. My problem is it will kick on blow hot air for a min then turn off for a min and then back on. What would be causing this thethermostat? Also how do I replace the filters when I don't know what filters it uses I'm new to...
Single 20amp circuit turns off 10 min turns back on
[ 2 Answers ]
I have a problem with a single 20Amp circuit, there are two small rooms with receptacles and lights attached to this circuit. (Home built in 1976). The power goes out completely and the 20Amp breaker does not trip or get hot, there is not any power across the breaker and then approximately 10min...
Panasonic tv: PT-50LC13 is not 5 inches of screen on each side in video mode
[ 1 Answers ]
I have a Panasonic TV model number PT-50LC13, and last night when I turned it to video mode to watch a movie the TV switched to a "full screen mode" to where it doesn't use about 5 inches of the screen on each side of the picture. The TV still shows the whole picture but it is in a condenced view... View more questions Search
Add your answer here.
|