Ask Experts Questions for FREE Help !
Ask
    elmoR's Avatar
    elmoR Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2010, 06:50 PM
    Defective ECM module on furnace blower
    Trane furnace one year old and ECM module on furnace went out, is there a problem with this part?

Check out some similar questions!

Bryant 350MAV blower motor ECM upgrade? [ 0 Answers ]

I have a Bryant 350MAV and would like to have an ECM blower motor installed to allow for continuous slow speed air recirculation. The unit is 12 years old and runs like a top. I've installed a fireplace insert in my home and the air handle return in that room would recirculate the heat on a slow...

Craftman gas blower not firing,where ignition-module [ 0 Answers ]

Craftman gas /leafblower not firing,new plug,clean carbon depoist from piston, cylinder bore still not cranking, any ideas?

How to test furnace control module [ 4 Answers ]

How to you test the Honeywell S8610U3009 furnace module and circuit board with the meter ! Gas company claims the control module or circuit board could be at fault due late ignition !(5 minutes ) Module will cost $96.10 to replace and are not returnable!? Al

Goodman furnace ECM motor blowing too much air? [ 5 Answers ]

I installed a Goodman GMV95 two speed gas furnace with ECM fan motor last fall. It functioned perfectly last winter, cutting my natural gas bill almost in half. When I installed the unit, I set it for 720 cfm (my ductwork is a little small for 95% efficient equipment) and verified the airflow by...

Defective Carrier Infinity Furnace [ 3 Answers ]

Two years ago when building a new home we chose to have a Carrier Infinity heat/ac system installed. It has never worked properly and the company that installed it doesn't seem to be getting much help from Carrier. The Infinity is what Carrier calls True Zone Heating. My system runs away...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.