Ask Experts Questions for FREE Help !
Ask
    worshamr's Avatar
    worshamr Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 6, 2010, 05:24 PM
    Coleman electric model 3400a818 heating element heats up but blower doesn't kick on
    Heating element heats up about every 60 seconds. Sometimes, it goes off without the blower kicking on and other times the blower doew kick on. If the blower switch is put in the on position the blower runs just fine. Do I need to replace a sequencer?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 6, 2010, 05:47 PM
    Bad heat sequencer or blower relay is probably the cause since they control the blower in the heat mode. If you thermostat has a ON setting for the blower switch to on to get you by.
    ldflatpick's Avatar
    ldflatpick Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Dec 10, 2010, 11:59 AM
    Blower doesn't kick on but heating element gets red I've replaced every component posible related to the blower and nothing please help
    ldflatpick's Avatar
    ldflatpick Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Dec 10, 2010, 12:04 PM
    Comment on ldflatpick's post
    How and where on line can I actully see the wiring in the control panel and wiring hornice
    ldflatpick's Avatar
    ldflatpick Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Dec 10, 2010, 12:06 PM
    Comment on hvac1000's post
    Where on line can I actully see wiring
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electric furnace element heats with no blower [ 1 Answers ]

Hi, I have intertherm furnace and the heating element goes on and off every 30 seconds without the blower coming on.

Nordyne Electric Furnace Heating Element [ 2 Answers ]

Hello, I have A Nordyne Electric Furnace- model# E2EH-012HA, and the heating element stays hot Even with thermostat in the off position, and, of course, the blower runs also with the element remaining hot. I have to turn the breaker off to stop the element from heating. Any help would be...

Electric furnace BLOWER will not kick off [ 1 Answers ]

Central Electric EB15B electric furnace. The blower runs continuously. The heat and air cooling kick on and off by the thermostat setting but the blower keeps running. I was told to replace the sequencer but that did not work. Just wasted 50 bucks. :( Any suggestions on what else it could be?

Heating element and blower fan [ 5 Answers ]

Hi, I have a Norge clothes dryer that was bought in 1991. I had a problem with the heating element coming on and going right back off. I changed the thermal fuse and high limit fuse but the element still does the same thing. I then found that the blower fan seems to be broken on the shaft and...

Electric Furnace - heating element [ 3 Answers ]

I am trying to convert from my broken boiler furnace to an electric furnace. I have central air and all the vents from that. Can I just buy a heating element and put it into the air handler? If I can, how do I know what size heating element to buy? The search on the internet gave 10 and 15 KW...

View more questions Search