Concord 80 plus furnace will not stay on

keniwhited Posts: 1, Reputation: 1

New Member

Dec 8, 2010, 02:53 PM

Concord 80 plus furnace will not stay on

I sanded and cleaned the old sensor and then tried a new one but still the same problem.. The red light flashes 3 times on the panel.. Any Ideas?

Check out some similar questions!

Concord 80 plus furnace [ 2 Answers ]

I have a concord 80 plus that is mounted horizontally. The pilot light turns on, the gas ignites, but will only stay lit for a few seconds. It will try this three or four times before the blower shuts off. The thermostat works fine (atleast it did for ac). Any suggestions?

Concord cg 90ca furnace will not stay lit [ 1 Answers ]

My concord cg 90 ca furnace will not stay lit after calling for heat.th inducer motor turns on,the ignitor lights ang the gas flows,but after lighting the ignitor turns off and the burner shuts down.The green troubleshooting code flashes 6 times. No luck with cleaning the flame sensor either. Is...

Concord 90+ Furnace Not Stay Lit [ 3 Answers ]

I have a concord 90+ furnace that tries to heat. THe burners do light, but only for about 15 seconds and then they try the cycle over. It does this five times, then quits and the LED flashes 7 times. Any suggestions. I do not have the error code list.

Concord furnace +90 [ 3 Answers ]

My furnace will not come on. Nor will my ac. This is a concord 90. I have power to the unit, and the red LED is on and not flashing. Help, Walt

Concord furnace? [ 1 Answers ]

I have a concord furnace model # rgu90a100d14-3a and was wondering what the cfm for this unit is?

View more questions Search

Check out some similar questions!

Add your answer here.