Ask Experts Questions for FREE Help !
Ask
    LisaTH's Avatar
    LisaTH Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 8, 2010, 08:11 AM
    Breake lights don't work even after changing fuse and bulbs.
    My break lighs don't work even after I changed the bulbs and fuse. I have a 1996 Plymoth Breeze.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 8, 2010, 08:14 AM

    Try spraying the brake light switch with WD-40. If the problem persists, check adjustment and continuity of the switch. Should the problem still persist, the switch may need to be replaced.
    LisaTH's Avatar
    LisaTH Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 8, 2010, 08:19 AM
    Comment on TxGreaseMonkey's post
    Where is the breake light switch located.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #4

    Dec 8, 2010, 08:54 AM

    Just above the brake pedal.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Brake lights don't work but fuses and bulbs are good [ 2 Answers ]

Started with cruise control not working, found out cruise control if brake lights don't work. All the lights work and fuses are good but when the brake pedal is pressed nothing.

Brake lights don't work, fuse is good, new bulbs [ 3 Answers ]

2002 Explorer 4.0 V6, checked the fuse looks good, replaced the bulbs, still no brake lights when brake is applied. Parking lights, turn signals and hazards work. Have to manually depress the switch to shift from park when brake is applied.

Tail lights on car not working but fuse is good and bulbs are good [ 4 Answers ]

The tail lights on car not working but fuse is good and bulbs are good

Tail lights and dashboard lights not workingbut brake lights work [ 4 Answers ]

I have a 95 ponitac bonneville, when I pull the switch to turn it on, the headlights only go on. My dash and tail lights will not go on. When I press the brake my dashboard lights go on. When I release the brake the ddash goes back off. Help anyone

My turn signals aren't working.bulbs or fuse? [ 3 Answers ]

I have a 2000 saturn sl2 sedan and the turn signals have been acting up for a while... they come on for a while and then stop blinking, both on the dash and on the lights themselves... now they have stopped altogether. Would this be bad bulbs or a bad fuse? All the signals stopped left, right,...

View more questions Search