I have a Heil and the blower moter comes on but not the inducer

jimmarbmw Posts: 1, Reputation: 1

New Member

Dec 7, 2010, 10:29 PM

I have a Heil and the blower moter comes on but not the inducer

When you disconnect the flame rollout switch the inducer comes on but no flame. The service indicator light dims on and off. Iam not sure what it's doing.

Check out some similar questions!

Heil SP80 Draft Inducer Motor Cycling On/Off [ 1 Answers ]

Hello, I have a Heil SP80 natural gas induced draft fan furnace, model # NUG5075BFB2. The unit fires up normally and all is well until the unit shuts off when the temperature setpoint is reached. The draft inducer motor then cycles on and off shortly after the flame is shut down and for 20...

Heil Gaspack draft inducer motor not coming on [ 5 Answers ]

The motor is only making a "humming" sound. I have checked all the obvious stuff, loose connections, power to heat unit, tube to pressure switch, igniter, etc... All seams well. The motor itself will turn smoothly by hand but will not move when unit is turned on. I also have no spark at the...

Replacing Blower Moter [ 1 Answers ]

I have a Ducane furnace, model#CMPE075U3, for which I have to replace the blower motor only. I have taken off the 4 nuts which seem to hold it in place, but it won't pull out. Is there something in the back holding it on?

Darft Inducer Blower - Heil DC90 [ 3 Answers ]

My gas furnace worked fine until a day or so ago. Everything works OK during furnace startup, but the draft inducer motor does not turn off until the call for heat is over. The draft inducer motor shuts down the same time as the burners shut down. Is this normal? Isn't the inducer motor suppose...

View more questions Search

Check out some similar questions!

Add your answer here.